Waterjet Garnet Extractor


XR1500HD Product Sheet (.pdf)
XR2500HD Product Sheet (.pdf)
XR2500SHD Product Sheet (.pdf)

All it Takes:

  • 8 square feet near the water jet
  • 20 minutes to install
  • Approximately 30 minutes to pre-charge and your Extractor is ready to go. No need for electrical or plumbing connections. Just a simple air hose connection is required for operation!
  • When The Extractor is full of garnet, simply use the forklift sleeves to carry The Extractor to the disposal area, lower the drop door and the dry garnet falls out! NO MESS!!

    The Extractor Benefits:

  • The Extractor will save your company thousands of dollars every year in wages, downtime, and disposal costs. The Extractor improves employees' safety by not having to shovel and lift heavy containers of wet garnet weighing hundreds of pounds.
  • The Extractor does not need expensive electrical or plumbing devices at all
  • The XR2500 holds 2,500 pounds of garnet (check your forklift capacity)
  • The XR2000 holds 2,000 pounds of garnet (check your forklift capacity)
  • The XR1500 holds 1,500 pounds of garnet (check your forklift capacity)

    Simple but Ingenious:

  • The innovative Extractor removal system was developed out of necessity by a shop owner that purchased a water jet cutting machine. After taking the machine offline for the first time, having employees spend two entire days removing and drying the garnet for disposal, they knew there had to be a better way. The Extractor is the result!
  • Performing maintenance and cleaning the reservoir tank while not losing production time are critical for every water jet owner. The Extractor fills this need.
  • The development of The Extractor has revolutionized garnet removal by saving time and money. No more having to deal with sludge and mud all over the shop. This is a clean and easy way to remove garnet.
  • One important safety benefit is minimizing potential physical injury while manually removing garnet.
  • There is no doubt that The Extractor is a “Win Win” for your shops' production time and your employees' safety!

    Capacity

  • The XR2500 holds 2,500 pounds of garnet
  • The XR1500 holds 1,500 pounds of garnet

    When the Garnet Extractor is full of garnet, simply use the forklift sleeves to carry The Extractor to the disposal area, lower the drop door and the dry garnet falls out! No Mess!

  • The Garnet Extractor will:

  • Save $1000's every year in wages, downtime and disposal costs.
  • Improve employees' safety by not having to shovel and lift heavy containers of wet garnet weighing hundreds of pounds.

    The Garnet Extractor features:

  • Does not need expensive electrical or plumbing devices
  • 20 minutes to install
  • Approximately 30 minutes to pre-charge
  • Just a simple air hose connection is required for operation

    Abrasive Removal System works with

  • Flow Waterjet Cutting Tool Systems
  • Jet Edge Waterjet Cutting Tool Systems
  • Omax Waterjet Cutting Tool Systems
  • Techni Waterjet Cutting Tool Systems
  • Oil & Wastewater Sludge Removal
  • Sandblast Abrasives
  • Water & Oil Separation

  • eXTReMe Tracker